# 100 flight hours/18 months inspection

## Preliminary requirements

### Required Conditions

<table><thead><tr><th>Action/Condition</th><th data-type="content-ref">Procedure/Data</th></tr></thead><tbody><tr><td>Remove the right transmission fairing (432BR).</td><td></td></tr><tr><td>Remove the left transmission fairing (432AL).</td><td></td></tr></tbody></table>

### Consumables, materials and expendables

| Nomenclature      | Identification No. | Qty |
| ----------------- | ------------------ | --- |
| Cleaning compound | C-318              | AR  |
| Clean cloth       | C-516              | AR  |

### Safety conditions

{% hint style="danger" %}
MAKE SURE YOU OBEY ALL OF THE SAFETY PRECAUTIONS WHEN YOU USE SOLVENTS. FAILURE TO DO SO MAY RESULT IN INJURY TO PERSONS AND/OR DAMAGE TO COMPONENTS.
{% endhint %}

{% hint style="warning" %}
DO NOT ALLOW SOLVENT TO MAKE CONTACT WITH PARTS MADE OF ELASTOMERIC MATERIAL OR DAMAGE WILL OCCUR.
{% endhint %}

## Procedure

### Do a detailed inspection of the Liquid Inertia Vibration Eliminator (LIVE) mount units, as follows:

1. Clean the left and right LIVE mount units with Clean cloth (C-516) moistened with Cleaning compound (C-318).
2. Examine the left and right LIVE mount units or dents, nicks, scratches, and tool marks. Look carefully at the elastomer part.
3. Examine the left and right LIVE mount unit for chafing, wear, cracks, and corrosion. Look carefully at the elastomer part.
4. Examine the left right LIVE mount unit for signs of leakage. No leakage allowed. Look carefully at the elastomer part for indication of fluid on it.

## Requirements after job completion

### Required Conditions

<table><thead><tr><th>Action/Condition</th><th data-type="content-ref">Reference</th></tr></thead><tbody><tr><td>Install the right transmission fairing (432BR).</td><td></td></tr><tr><td>Install the left transmission fairing (432AL).</td><td></td></tr></tbody></table>
